APAX-5060 12-ch Relay Output Module APAX-5080 4/8-ch High/Low Speed Counter Module NEW NEW APAX-5060 RoHS APAX-5080 RoHS COMPLIANT COMPLIANT 2002/95/EC 2002/95/EC Specifications Specifications General General ƒ Dimensions (W x H x D) 30 x 139 x 100 mm ƒ Dimensions (W x H x D) 30 x 139 x 100 mm ƒ Weight 170 g ƒ Weight 195 g ƒ Power Consumption 2.5 W @ 24 V (typical) DC ƒ Power Consumption 2 W @ 24 V (typical) DC ƒ Status Display LED per channel (for DI/O only) ƒ Status Display LED per channel On: Logic level 1; Off: Logic level 0 On: Logic level 1 Off: Logic level 0 Counter/Frequency Input ƒ Channels & Mode 8 (Up Counter, High/Low Freq. and Wave Width mode) Relay Output 4 (Pulse and Direction, Up/Down Pulse, A/B Phase) ƒ Counting Range 32-bit + 1-bit overflow ƒ Channels 12 ƒ Minimum Pulse Width 1 μs for High Freq. mode; 1 ms for Low Freq. mode ƒ Relay Type Form A (SPST) ƒ Counter Frequency 0.1 Hz ~ 10 Hz for Low Freq. mode and Wave Width ƒ Switching Capacity and Lifetime of the Contact (for resistive load) mode VDE: 30,000 operations (5 A @ 250 V , AC 10 Hz ~ 1M Hz for High Freq. mode and other modes 10 operations/minute at 8°C) ƒ Input Voltage For "0" signal: 0 ~ 3 V ; For "1" signal: 10 ~ 30 V DC DC 70,000 operations (5 A @ 30 V , DC ƒ Accuracy 0.1% for Low Freq. mode 10 operations/ minute at 85°C) ƒ Input Filter 0.1 us ~ 40 ms UL: 60,000 operations (5 A @ 250 V ) AC 100,000 operations (5 A @ 30 V ) DC Digital Input Mechanism: 20,000,000 operations ƒ Channels 4 (no load, 300 operations/min) ƒ Type Sink (wet contact) ƒ Breakdown Voltage 500 V (50/60 Hz) AC ƒ Input Voltage For "0" signal: 0 ~ 3 V ; For "1" signal: 10 ~ 30 V DC DC ƒ Contact Resistance 30 mΩ (maximum) Digital Output ƒ Insulation Resistance 1 GΩ (minimum) at ƒ Channels 4 (sink type) 500 VDC ƒ Output Voltage Range 8 ~ 35 V DC ƒ Normal Output Current 0.5 A (per channel) Protection ƒ Isolation Between 2,500 V DC Protection Channels and Backplane ƒ Isolation Between 2,500 V DC Channels and Backplane Environment ƒ Short Circuit Protection (For DO channel) ƒ Operating Temperature -10 ~ 60°C (when mounted vertically) ƒ Thermal Shutdown Protection (For DO channel) -20 ~ 70°C (for PE version) Environment ƒ Storage Temperature -40 ~ 70°C ƒ Operating Temperature -10 ~ 60°C (when mounted vertically) ƒ Relative Humidity 5 ~ 95% (non-condensing) ƒ Storage Temperature -40 ~ 70°C ƒ Relative Humidity 5 ~ 95% (non condensing) Ordering Information ƒ APAX-5060 12-ch Relay Output Module Ordering Information ƒ APAX-5080 4/8-ch High Speed Counter Module Online Download www.advantech.com/products All product specifications are subject to change without notice Last updated : 20-Sep-2016