ADAM-6015 7-ch Isolated RTD Input Modbus TCP Module 8-ch Isolated Analog Input Modbus TCP Module ADAM-6017 with 2-ch DO 8-ch Isolated Thermocouple Input Modbus TCP ADAM-6018 Module with 8-ch DO RoHS RoHS RoHS ADAM-6015 COMPLIANT ADAM-6017 COMPLIANT ADAM-6018 COMPLIANT 2002/95/EC 2002/95/EC 2002/95/EC Specifications Specifications Specifications Analog Input Analog Input Analog Input ƒ Channels 7 (differential) ƒ Channels 8 (differential) ƒ Channels 8 (differential) ƒ Input Impedance > 10 MΩ ƒ Input Impedance > 10 MΩ (voltage) ƒ Input Impedance > 10 MΩ 120 Ω (current) ƒ Input Connections 2 or 3 wire ƒ lnput Type Thermocouple ƒ lnput Type mV, V, mA ƒ Input Type Pt, Balco and Ni RTD ƒ Thermocouple Type and Range: ƒ lnput Range ±150mV , ±500mV , ±1 V ƒ RTD Types and Temperature Ranges J 0 ~ 760°C R 500 ~ 1,750°C , ±5V , ±10V, 0~150mV, Pt 100 -50°C ~ 150°C K 0 ~ 1,370°C S 500 ~ 1,750°C 0~500mV , 0~1V , 0~5V , 0°C ~ 100°C T -100 ~ 400°C B 500 ~ 1,800°C 0~10V, 0~20mA , 4~20mA , 0°C ~ 200°C ±20mA E 0 ~ 1,000°C 0°C ~ 400°C -200°C ~ 200°C ƒ Accuracy ±0.1% (voltage) ƒ Accuracy ±0.1% Pt 1000 -40°C ~ 160°C ±0.2% (current) Supports both IEC 60751 ITS90 (0.0385 W/W/°C) ƒ Span Drift ±25 ppm/°C ƒ Span Drift ±25 ppm/°C and JIS C 1604 (0.0392 W/W/°C) ƒ Zero Drift ±6 μV/°C ƒ Zero Drift ±6 μV/°C Balco 500 -30°C ~ 120°C ƒ Resolution 16-bit ƒ Resolution 16-bit Ni 518 -80°C ~ 100°C ƒ Sampling Rate 10 or 100 sample/ second ƒ Sampling Rate 10 sample/ second (total) 0°C ~ 100°C CMR @ 50/60 HZ 90dB (total) ƒ Accuracy ± 0.1 % or better CMR @ 50/60 HZ 90dB NMR @ 50/60 HZ 60dB High speed mode ±0.5% or better NMR @ 50/60 HZ 67dB ƒ Wire Burn-out Detection ƒ Span Drift ± 25 ppm/°C ƒ Common-Mode 350VDC ƒ Zero Drift ± 6 μV/°C Digital Output Voltage ƒ Resolution 16-bit ƒ Channels 8, open collector to 30 V, Digital Output ƒ Sampling Rate 100 mA max. load ƒ Channels 2, open collector to 30 V, 10 sample/ second (total) ƒ Power Dissipation 300 mW for each module 100 mA max. load High speed mode:1K sample/second (total) CMR @ 50/60 HZ 90dB ƒ Power Dissipation 300 mW for each module Ordering Information NMR @ 50/60 HZ 60dB ƒ Output Delay On: 100μs ƒ ADAM-6018 8-ch Isolated * high speed mode does not support CMR/NMR Off: 150μs Thermocouple Input ƒ Wire Burn-out Detection Modbus TCP Module w/ Ordering Information 8-ch DO Ordering Information ƒ ADAM-6017 8-ch Isolated AI with 2-ch ƒ ADAM-6015 7-ch Isolated RTD Input DO Modbus TCP Module Modbus TCP Module ƒ Power Input 10 ~ 30 V DC Environment Common Specifications ƒ Supports Peer-to-Peer ƒ Operating -10 ~ 70°C (14 ~ 158°F) ƒ Supports GCL General Temperature -20 ~ 70°C (-4 ~ 158°F) ƒ Supports Modbus/TCP, TCP/IP, UDP and HTTP (ADAM-6017) ƒ LAN 10/100Base-T(X) Protocols ƒ Storage Temperature -20 ~ 80°C (-4 ~ 176°F) ƒ Power Consumption 2.5 W @ 24 VDC (ADAM-6015) -30 ~ 80°C (-22 ~ 176°F) Protection 2.7 W @ 24 VDC (ADAM-6017) (ADAM-6017) 2 W @ 24 V (ADAM-6018) ƒ Over Voltage ±35 VDC DC ƒ Operating Humidity 20 ~ 95% RH ƒ Connectors 1 x RJ-45 (LAN), Plug-in screw Protection (non-condensing) ƒ Isolation Protection 2,000 V terminal block (I/O and power) DC ƒ Storage Humidity 0 ~ 95% RH ƒ Built-in TVS/ESD Protection ƒ Watchdog System (1.6 second) and (non-condensing) ƒ Power Reversal Protection Communication (programmable) IoT Ethernet I/O Modules: ADAM-6000 All product specifications are subject to change without notice Last updated : 27-Jul-2016