IPC Station

Description

uB39: DC Current Field Output Module
Acromag's microBlox™ uB Series I/O modules offer a compact, high-performance solution for interfacing sensors and field devices with data acquisition systems. uB signal conditioning modules are ideal to isolate, filter, convert and amplify a wide variety of signal types for test, measurement and control systems. Just plug uB modules into 4, 8, or 16-channel backpanels in any mix for a high-density analog I/O interface. Channel-to-channel isolation provides optimal noise and surge protection from ground loops, spikes, and high common mode voltages. The uB39 model converts a 0-5V or ±5V signal received from the host system to drive a scaled process current field output signal. It functions like an isolated, voltage-controlled current source to drive field instruments. Bluetooth® wireless technology versions enable configuration using a smart phone or tablet. Acromag's AgilityTM app, available for AndroidTM and iOS® mobile devices, helps you vary input/ output ranges and scaling to your specific application. The Agility app can also set an alarm output function with a setpoint limit and deadband. Other app functions include polling inputs, trending values in a sharable chart, updating calibration, and diagnostic troubleshooting. For cost-sensitive projects, a commercial-grade version is available (-CG models). These units offer similar performance, but over a limited temperature range and lack hazloc approvals. Backpanels provide power, I/O wiring terminals, and host access to an industry-standard analog signal bus. Modules are hot-swappable without screws. Data acquisition boards can access all host I/O signals on the DB25 bus connector.microBlox uB Analog Module, DC Current Out; Output: 4-20mA, 100Hz, Input: 0-5VmicroBlox uB Commercial Grade Analog Module, DC Current Out; Output: 4-20mA, 100Hz, Input: 0-5VmicroBlox uB Analog Module, DC Current Out; Output: 4-20mA, 100Hz, Input: ±5V

Part Number

UB39-02

Price

Request Quote

Manufacturer

ACROMAG

Lead Time

Request Quote

Category

Signal Conditioners & Converters » microBlox Signal Conditioning I/O Modules

Specifications

Categorization Information

Signal Conditioners & Converters
microBlox Signal Conditioning I/O Modules
Analog Output Modules
microBlox uB Series

Features

Wide variety of input and output ranges
Mixes with different I/O types on compact 4, 8, or 16 channel backpanels
Select fixed I/O range models or Bluetooth wireless technology user-configurable models
Cost-saving commercial-grade versions available for less demanding applications
Android® and iOS® apps simplify wireless configuration with a smartphone or tablet
Mobile app configures I/O ranges, sets scaling, calibrates and performs diagnostics
Optional alarm function with setpoint and deadband control driving 0/5V host output
Poll and trend I/O values to sharable charts
High accuracy, noise immunity, and stability
Isolated field-to-host and channel-to-channel (1500Vac peak, 250Vac/354Vdc continuous)
Over-molded I/O circuits offer superior shock, vibration, moisture, and dust protection.
Wide operating temperature range
UL/cUL Class I, Div 2, ABCD and ATEX Zone 2 hazardous location approvals
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Acromag is under license other trademarks are property of their respective owners.
Host Input: ±5V or 0-5V ranges
Field Output: 0-20mA or 4-20mA DC ranges

Datasheet

uB04-08-16-microBlox-Backpanels-1.pdf

380 KiB

Download

Extracted Text

TM Signal Conditioners: microBlox Series uBDC1 DC Power Module SWITCHING REVERSE (UP TO 1A) BUCK 10uH 10-32V DC CM POLARITY +5V HOST REGULATOR CM FILTER PROTECT +24V FILTER FB 500KHz POWER TO PANEL BUS POWER OUT SOFT LIM (ON BACK-PANEL) ADJ START COMMON Wide-Range DC Voltage Input ◆ 5V/1A DC Output to Backpanel ◆ Supports Redundant Power Description Key Features & Benefits Acromag’s microBlox™ uB Series I/O modules With the uBDC1 power module, users can also ■ Allows use of wide range 10-32V DC power offer a compact, high-performance solution implement redundant power methods for the supplies to operate backpanels for interfacing sensors and field devices with backpanel. In redundant applications, the uBDC1 ■ Enables implementation of redundant power to data acquisition systems. uB signal conditioning becomes the primary power source. uB backpanels. modules are ideal to isolate, filter, convert and amplify a wide variety of signal types for test, ■ Polarized to only fit in panel power slot measurement and control systems. Just plug uB ■ Over-molded circuit has superior shock, modules into 4, 8, or 16-channel backpanels in vibration, moisture, and dust protection. any mix for a high-density analog I/O interface. Channel-to-channel isolation provides optimal ■ -40 to 80°C (-40 to 176°F) operation noise and surge protection from ground loops, ■ UL, cUL Class I, Div 2, ABCD and ATEX Zone 2 spikes, and high common mode voltages. hazardous location approvals The uBDC1 power module allows a backpanel populated with I/O modules to operate off DC power voltage levels other than 5V. This optional module plugs into a special socket on the backpanel to convert a power supply voltage from 10-32V DC to 5V/1A which will drive up to 16 I/O modules. uBDC1 modules include over-voltage, reverse-voltage and short-circuit protection (current limiting). ■ ■ ■ ■ Tel 248-295-0880 Fax 248-624-9234 sales@acromag.com www.acromag.com 30765 Wixom Rd, Wixom, MI 48393 USA Bulletin #8400-887 TM Signal Conditioners: microBlox Series uBDC1 DC Power Module ■ Environmental Ordering Information Performance Specifications Operating Temperature Model Non-Isolated Input Output See Backpanels for additional system specifications. -40 to 80°C (-40° to 176°F). uBDC1 10-32V DC 5V, 1A DC Ambient Operating Temperature ■ General -40°C to +80°C, no deration. Accessories Dimensions Storage Temperature Height: 1.380” with connectors. 0.970” without. Model Description -40 to 85°C (-40° to 185°F). Width: 0.425”. Length: 1.425”. Relative Humidity uB04 4 channel panel, surface mount Input 0 to 95% non-condensing. 10-32V DC. uB04D 4 channel panel, DIN rail mount Isolation Output Voltage uB08 8 channel panel, surface mount Non-isolated. 5V DC ±5% (4.7V to 5.3V range). Power is common to host-side of I/O. uB08D 8 channel panel, DIN rail mount Output Current Shock and Vibration Immunity uB16 16 channel panel, surface mount 1A (1.25A absolute maximum). Conforms to: Efficiency uB16D 16 channel panel, DIN rail mount IEC 60068-2-6: 10-500 Hz, 4G, 2 hours/axis, for 90% typical. sinusoidal vibration. Output Ripple IEC 60068-2-64: 10-500 Hz, 4G-rms, 2 hours/axis , for Less than 150mVp-p, typical. random vibration. EC 60068-2-27: 25G, 11ms half-sine, 18 shocks at 6 Response Time orientations, for mechanical shock. Less than 15ms typical. Electromagnetic Compatibility (EMC) Compliance Over-Voltage Protection Minimum immunity per BS EN 61000-6-1 (2007): TVS in module plus additional TVS protection provided CE marked, per EMC Directive 2004/108/EC. on backpanel. Electrostatic Discharge Immunity (ESD), Current-Limiting per IEC 61000-4-2. Built-In, plus additional limiting provided on backpanel. Radiated Field Immunity (RFI), per IEC 61000-4-4. Reverse-Voltage Protection Electrical Fast Transient Immunity (EFT), Built-In, plus additional protection provided on per IEC 61000-4-4. backpanel. Surge Immunity, per IEC 61000-4-5. Conducted RF Immunity (CRFI), per IEC 61000-4-6. Filterting Transient voltage suppression, capacitors, & common- Emissions mode I/O filtering. Class B product with emissions per BS EN 61000-6-3 (2007+A1:2011): enclosure port, per CISPR 16. Line Regulation Low voltage AC mains port, per CISPR 16. Less than 0.005% 10-32V, 1A, typical. Approvals Load Regulation CE compliant. RoHS Compliant. Less than 4%, 0.05A to 1A, typical. UL/cUL Class 1, Division 2, Groups ABCD. ATEX Zone 2. ■ ■ ■ ■ Tel 248-295-0880 Fax 248-624-9234 sales@acromag.com www.acromag.com 30765 Wixom Rd, Wixom, MI 48393 USA All trademarks are property of their respective owners. Copyright © Acromag, Inc. 2016. Data subject to change without notice. Printed in USA 5/2016

Frequently asked questions

IPC Station' parent company, GID Industrial, specializes in procuring industrial parts. We have years of experience finding rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

The warranty we offer will be based on what we negotiate with our suppliers. It is possible for some parts to be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

We use FedEx, UPS, DHL, and USPS. We have our own accounts, but we can also use yours if you would prefer. However, we can use other carriers if it will be more convenient for you.

IPC Station will definitely serve you. In fact, much of our business is international, and we are familiar with shipping to destinations all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by IPC Station. We can also accept wire transfers and PayPal, or a check if you're in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products