PMC Module Carriers APMC4110 Busless PMC Module Carrier Card P1 P2 J1 J2 J3 J4 JTAG POWER RESET +5V –12V +12V C Holds one PMC module ◆ Delivers power to PMC module ◆ Enables a trouble-free start-up sequence Description Key Features & Benefits This PMC module carrier card allows use of a ■ Single-slot PMC carrier card PMC module in an independent stand-alone ■ Stand-alone design does not require expensive mode. The carrier card delivers power to the card cage or other computer chassis PMC module and regulates the PCI bus start-up sequence to prevent a system lock-up by the ■ Ideal for custom computing solutions based on connection to the local bus. configurable FPGA modules As a non-intelligent carrier, the board acts simply ■ On-board DC-DC converter provides +3.3V DC as an adapter to route signals to and from the to the PMC module from a +5V power source PMC module. The user has full access to the field ■ Users can optionally provide a ±12V DC source I/O via two 50-pin ribbon cable connectors. ■ Manual reset button initiates a PCI reset at Using an external power supply, this carrier card user’s discretion allows use of any industry-standard PMC module. The on-board DC-DC converter creates +3.3VDC ■ Voltage monitor designed to prevent code from the external +5VDC source, lowering the execution errors during power-up, power- number of external power connections required. down, or potential brown-out conditions when +5V DC supply dips too low For troubleshooting, a 14-pin Xilinx JTAG connector facilitates boundary scan debugging. ■ A standard 14-pin Xilinx JTAG connection is Also, a manual reset button allows the user to available for utilizing the TDI, TDO, TCK, and force an RST# signal when needed. TMS signals ■ Front or rear connection I/O access ■ ■ ■ ■ Tel 248-295-0310 Fax 248-624-9234 solutions@acromag.com www.acromag.com 30765 Wixom Rd, Wixom, MI 48393 USA Bulletin #8400-622b PMC Module Carriers APMC4110 Busless PMC Module Carrier Card ■ Environmental Performance Specifications Ordering Information Operating temperature -40 to 85°C. ■ PMC Compatibility Carrier Card Storage temperature Pin assignment conforms to PCI Bus Specification, APMC4110 -55 to 120°C. Revision 3.0. Stand-alone powered PMC module carrier card. Relative humidity ■ Physical Accessories 5 to 95% non-condensing. Physical Configuration 5025-550-x Power Height: 3.300 inches (83.820 mm). Flat ribbon cable, non-shielded, 50-pin connector at +5V (±5%): 66mA, typical. both ends. Specify x = length, in feet (12ft. max.). Depth: 3.520 inches (89.408 mm). +12V (±10%): 0mA, used by PMC module only. 5025-551-x Board Thickness: 0.063 inches (1.600 mm). -12V (±10%): 0mA, used by PMC module only. Flat ribbon cable, shielded, 50-pin connector at both Unit Weight: 0.107 lbs. (0.053 kg). Note that 3.3V is generated from the 5V supply. ends. Specify x = length, in feet (12ft. max.). Power requirements do not include the PMC module. Connectors 5025-552 P1, P2 (Field I/O): 50-pin, ribbon cable, male receptacle ±12.0V DC is optional based on user’s needs. Termination panel, DIN rail-mount, 50 screw terminals, headers. 50-pin ribbon cable connector. Isolation P3: 4-pin power header. Non-Isolated. PCI interface and field commons have a PMC Modules direct electrical connection. P4: 14-pin Xilinx JTAG port. See www.acromag.com for more information. MTBF J1 - J4: 64-pin PMC module connectors. Contact the factory. Software Development Tools See www.acromag.com for more information. RIBBON CABLE CONNECTORS PMC MODULE CONNECTORS COMPONENT SIDE OF PMC CARRIER JTAG POWER COMPONENT SIDE OF PMC MODULE MOUNTING STANDOFF RESET PMC CARRIER CONNECTORS ■ ■ ■ ■ Tel 248-295-0310 Fax 248-624-9234 solutions@acromag.com www.acromag.com 30765 Wixom Rd, Wixom, MI 48393 USA All trademarks are property of their respective owners. Copyright © Acromag, Inc. 2010. Data subject to change without notice. Printed in USA 9/2010.