® AcroPack Module Carriers ® APCe7000 Series PCI Express Carrier Cards for AcroPack Modules APCe7020E-LF JTAG PCIe +12V DC/DC Power +1.5, +3.3, +5, +12, -12 FUSES Converter +3.3V Field I/O AcroPack Site A A Slot Address x1 PCIe x4 PCIe PCIe Switch x1 PCIe Power +1.5, +3.3, +5, +12, -12 Field AcroPack Site B I/O B CPLD DIP Switch Slot Address Two AcroPack or mini-PCIe mezzanine module slots ◆ Non-Intelligent carrier card ◆ PCIe x4 interface Description Key Features & Benefits Model: APCe7020E-LF ■ Two AcroPack or mini-PCIe module slots support any combination of I/O functions ® The AcroPack product line updates our popular Industry Pack I/O modules with a PCIe interface ■ PCI Express compliant format. This tech-refresh design offers a compact ■ Plug-and-play carrier configuration and size, low-cost I/O, the same functionality and interrupt support memory map of the existing Industry Pack modules. ■ Fused +1.5V, +3.3V, +5V, +12V, and -12V DC power is provided. A fuse is present on each This board interfaces two AcroPack mezzanine supply line serving each AcroPack module. modules to a PCI Express bus on a PC-based computer system. ■ Front panel SCSI-2 connectors for field I/O APCe7020 populated with two Acromag AcroPack modules signals Two AcroPack module slots give you the freedom to mix a variety of I/O functions (A/D, D/A, digital ■ Extended temperature range in, digital out, serial I/O, etc.) on a single board. ■ DIP switch card identification Or, combine modules of the same type for almost one hundred channels on a single card. Either ■ Standard 14-pin Xilinx JTAG programming way, the APCe7020 saves your precious card slots header and reduces your costs. ■ Software development tools for VxWorks, Select I/O modules from Acromag’s offering or Linux, and Windows environments use most third-party mPCIe compliant modules. ■ ■ ■ ■ Tel 248-295-0310 Fax 248-624-9234 solutions@acromag.com www.acromag.com 30765 Wixom Rd, Wixom, MI 48393 USA Bulletin #8400-883d ® AcroPack Module Carriers ® APCe7000 Series PCI Express Carrier Cards for AcroPack Modules ■ Physical Performance Specifications Ordering Information Physical Configuration PCIe x4 lane ■ PCI Express Bus Compliance Carrier Card Length: 5.158 inches (131.01 mm) This device meets or exceeds all written PCI Express APCe7020E-LF Height: 3.918 inches (99.52 mm) specifications per revision 2.1. AcroPack carrier card for AcroPack or mPCIe modules, Field I/O Connector plus extended temperature range Includes a PCIe Gen 2 switch to expand the single host 50-pin male header; 2 mini-PCIe connectors, 2 field PCIe port to two ports, one to each device (AcroPack I/O Champ connectors; 1 PCI Express bus interface Accessories or mini-PCIe). connector. 5028-372 The host port consists of four PCIe lanes, each of the Round cable, shielded, SCSI-2 to CHAMP. 0.8mm, ■ Environmental mini-PCIe sites have one lane each. 2 meters long. Operating temperature ■ I/O Interface 5028-378 -40 to +85°C Termination panel, SCSI-2 connector, 50 screw Front I/O Storage temperature terminals Connector: 50-pin 0.8mm Champ cable connection. -55 to +125°C. ® Pin assignments are defined by the installed AcroPack AcroPack Modules Relative humidity or mini-PCIe module. 5 to 95% non-condensing. See www.Acromag.com/AcroPacks for more The field side connector of the AcroPack I/O module information. Power mates to a Samtec SS5-50-3.00-L-D-K-TR socket +3.3 Volts (±10%): 0.55mA typical Software Development Tools connector P2 on the carrier board. +12 Volts (±5%): 25mA Typical APSW-API-VXW Gold plating in the connection area, M2.5 screws and The APCe7020E-LF has three DC/DC converters to ® VxWorks software support package spacers provide excellent connection integrity and provide the power supply voltages to the AcroPack stability for harsh environments. APSW-API-WIN modules that are not present at the host interface. The ® Windows DLL driver software support package +1.5 Volt supply is sourced from the +3.3 Volt host ■ Ease of Use power. The +5 Volt and -12 Volt supply is sourced APSW-API-LNX A unique carrier and site number can be set for ® from +12 Volt host power. Linux support (website download only) each AcroPack site by a DIP switch. This provides the capability to distinguish a particular AcroPack module from others when multiple instances of the same module are used in a system. A standard 14-pin Xilinx JTAG programming header is provided for programming and debugging the FPGA on some AcroPack modules. The JTAG ports of the two AcroPack modules are daisy-chained. AcroPack modules snap onto the APCe7020, eliminating messy ribbon cables. ■ ■ ■ ■ Tel 248-295-0310 Fax 248-624-9234 solutions@acromag.com www.acromag.com 30765 Wixom Rd, Wixom, MI 48393 USA All trademarks are property of their respective owners. Copyright © Acromag, Inc. 2017. Data subject to change without notice. Printed in USA 6/2017.