website
+1 (972) 476-1899
| Part Number | AP231-16E |
|---|---|
| Manufacturer | ACROMAG |
| Category | AcroPack I/O Modules » Analog I/O |
| Price | Request Quote |
| Lead Time | Request Quote |
AP231: 16-bit DAC
The AP231 outputs analog voltage signals to drive up to 16 devices. When used with a carrier that holds two AcroPack AP modules, up to 32 voltage outputs can be obtained from a single card cage slot. Each output channel has its own 16-bit D/A converter (DAC). Individual DACs are faster, and they eliminate glitches typically caused by the re-acquisition process of sample and holds found on multiplexed output boards. Individual channels also have double-buffered data latches. You can select to update each output when it is written to, or to update all outputs simultaneously. Simultaneous outputs better simulate linear movements in motion processes. Designed for COTS applications these analog output modules deliver high-density, high-reliability, and high-performance at a low cost. AcroPack modules are ROHS compliant and ideal for military, defense, automation, aerospace, scientific, and development labs industries. The AP231 modules are 70mm long, 19.05mm longer than the full length mini PCIe card. The board's width is the same as mPCIe board and use the same mPCIe standard board hold down strandoff and screw keep out areas. A down facing 100 pin Samtec connector will mate with the carrier card. Fifty of these signals are available as field I/O signals. The AP231 supports 6 independent software selectable output ranges plus capabilities to monitor the status of each output. Note: AcroPack modules are compatible only with the carriers listed in the accessory section of this page.AcroPack analog voltage ouput mezzanine module: 16-bit DAC, 16 channels
Once you accept your quote and confirm your order, we prepare by retrieving related parts and components from our inventory. Anything we do not currently have in stock is sourced.
Upon receipt, all parts are visually inspected for damage and then photographed to document their condition. Parts acquired from vendors must meet our quality standards.
Industrial computer boards and other parts we are equipped to evaluate are tested to verify functionality and discover possible damage.
Industrial computer boards have all components with low MTBF numbers (such as capacitors and connectors) replaced and are washed in our PCB cleaner to remove dust and grime.
Industrial computer boards are fully diagnosed and repaired by our engineers. Logs of the problems encountered and solutions implemented are recorded.
Industrial computer boards have all I/O connections rigorously tested to ensure that everything is working properly before the board is certified as ready to ship.
After photos are taken to document the exterior condition of the part, it is packaged and sent to the customer. ESD-safe materials are used to protect sensitive equipment on its journey.
IPC Station is a website of GID Industrial, an ISO 9001:2015-certified company that has specialized in servicing industrial computer boards and providing other industrial products for sectors including manufacturing, defense, aerospace, entertainment, healthcare, and more by utilizing our combined skills and vast international network of trusted suppliers since our founding in 2015.
Do you need an AP231-16E? We can help you find it at a competitive price!
| Categorization Information | Embedded I/O & Processors AcroPack I/O Modules Analog I/O AP200 Series |
|---|
Download "AP220-12-bit-DAC-Analog-Voltage-Output-Mezzanine-Module.pdf" (719 KiB)
® AcroPack Module Carriers ® APCe7000 Series PCI Express Carrier Cards for AcroPack Modules APCe7020E-LF JTAG PCIe +12V DC/DC Power +1.5, +3.3, +5, +12, -12 FUSES Converter +3.3V Field I/O AcroPack Site A A Slot Address x1 PCIe x4 PCIe PCIe Switch x1 PCIe Power +1.5, +3.3, +5, +12, -12 Field AcroPack Site B I/O B CPLD DIP Switch Slot Address Two AcroPack or mini-PCIe mezzanine module slots ◆ Non-Intelligent carrier card ◆ PCIe x4 interface Description Key Features & Benefits Model: APCe7020E-LF ■ Two AcroPack or mini-PCIe module slots support any combination of I/O functions ® The AcroPack product line updates our popular Industry Pack I/O modules with a PCIe interface ■ PCI Express compliant format. This tech-refresh design offers a compact ■ Plug-and-play carrier configuration and size, low-cost I/O, the same functionality and interrupt support memory map of the existing Industry Pack modules. ■ Fused +1.5V, +3.3V, +5V, +12V, and -12V DC power is provided. A fuse is present on each This board interfaces two AcroPack mezzanine supply line serving each AcroPack module. modules to a PCI Express bus on a PC-based computer system. ■ Front panel SCSI-2 connectors for field I/O APCe7020 populated with two Acromag AcroPack modules signals Two AcroPack module slots give you the freedom to mix a variety of I/O functions (A/D, D/A, digital ■ Extended temperature range in, digital out, serial I/O, etc.) on a single board. ■ DIP switch card identification Or, combine modules of the same type for almost one hundred channels on a single card. Either ■ Standard 14-pin Xilinx JTAG programming way, the APCe7020 saves your precious card slots header and reduces your costs. ■ Software development tools for VxWorks, Select I/O modules from Acromag’s offering or Linux, and Windows environments use most third-party mPCIe compliant modules. ■ ■ ■ ■ Tel 248-295-0310 Fax 248-624-9234 solutions@acromag.com www.acromag.com 30765 Wixom Rd, Wixom, MI 48393 USA Bulletin #8400-883d ® AcroPack Module Carriers ® APCe7000 Series PCI Express Carrier Cards for AcroPack Modules ■ Physical Performance Specifications Ordering Information Physical Configuration PCIe x4 lane ■ PCI Express Bus Compliance Carrier Card Length: 5.158 inches (131.01 mm) This device meets or exceeds all written PCI Express APCe7020E-LF Height: 3.918 inches (99.52 mm) specifications per revision 2.1. AcroPack carrier card for AcroPack or mPCIe modules, Field I/O Connector plus extended temperature range Includes a PCIe Gen 2 switch to expand the single host 50-pin male header; 2 mini-PCIe connectors, 2 field PCIe port to two ports, one to each device (AcroPack I/O Champ connectors; 1 PCI Express bus interface Accessories or mini-PCIe). connector. 5028-372 The host port consists of four PCIe lanes, each of the Round cable, shielded, SCSI-2 to CHAMP. 0.8mm, ■ Environmental mini-PCIe sites have one lane each. 2 meters long. Operating temperature ■ I/O Interface 5028-378 -40 to +85°C Termination panel, SCSI-2 connector, 50 screw Front I/O Storage temperature terminals Connector: 50-pin 0.8mm Champ cable connection. -55 to +125°C. ® Pin assignments are defined by the installed AcroPack AcroPack Modules Relative humidity or mini-PCIe module. 5 to 95% non-condensing. See www.Acromag.com/AcroPacks for more The field side connector of the AcroPack I/O module information. Power mates to a Samtec SS5-50-3.00-L-D-K-TR socket +3.3 Volts (±10%): 0.55mA typical Software Development Tools connector P2 on the carrier board. +12 Volts (±5%): 25mA Typical APSW-API-VXW Gold plating in the connection area, M2.5 screws and The APCe7020E-LF has three DC/DC converters to ® VxWorks software support package spacers provide excellent connection integrity and provide the power supply voltages to the AcroPack stability for harsh environments. APSW-API-WIN modules that are not present at the host interface. The ® Windows DLL driver software support package +1.5 Volt supply is sourced from the +3.3 Volt host ■ Ease of Use power. The +5 Volt and -12 Volt supply is sourced APSW-API-LNX A unique carrier and site number can be set for ® from +12 Volt host power. Linux support (website download only) each AcroPack site by a DIP switch. This provides the capability to distinguish a particular AcroPack module from others when multiple instances of the same module are used in a system. A standard 14-pin Xilinx JTAG programming header is provided for programming and debugging the FPGA on some AcroPack modules. The JTAG ports of the two AcroPack modules are daisy-chained. AcroPack modules snap onto the APCe7020, eliminating messy ribbon cables. ■ ■ ■ ■ Tel 248-295-0310 Fax 248-624-9234 solutions@acromag.com www.acromag.com 30765 Wixom Rd, Wixom, MI 48393 USA All trademarks are property of their respective owners. Copyright © Acromag, Inc. 2017. Data subject to change without notice. Printed in USA 6/2017.
Any product names, logos, brands, and other trademarks or media featured or referred to on IPC Station are the property of their respective owners.
GID Industrial is not an authorized distributor, reseller, or representative for the products featured on this site, and is not affiliated with, sponsored by, or endorsed by any of the manufacturers or holders of the rights to the aforementioned products.
All information on this site is displayed strictly for identification purposes and does not indicate a relationship with or an approval from any third parties.
